New Product Additions

02 Apr

Terrasat’s NEW 100W Ku-Band IBUC

The 100W Ku‐Band IBUCs provide high efficiency and the superior linearity of Gallium Arsenide‐based power amplifiers.

Terrasat IBUC 100W Ku-Band Intelligent Block Upconverter, 14.0 to 14.5 GHz, equipped with:
– AGC/ALC
– Internal diagnostics
– FSK M&C capable
– TCP/IP via RJ45 connector with embedded webpages and SNMP.
– RS485, RS232,
– Multifunction LED Indicator
– Waveguide output
– N-type input.
– AC-powered, 100-240 VAC.
– PN IBR140145-0NA100WW

IBUC offers significant benefits:

  • Low terminal cost
  • Simple design and installation
  • Superior RF performance
  • Simplified 1+1 configuration

New interfaces connect you to extensive M&C facilities for network management or local access. This powerful new M&C enables:

  • Trouble‐free commissioning with easy, point‐and‐click installation/configuration
  • Continuous verification of performance with time‐stamped alarm history
  • Simplified monitoring of terminal status

The IBUC comes with a complete set of diagnostic tools including:

  • 10 MHz input detector
  • Input voltage and current monitoring
  • Transmit L‐band input level detector
  • Transmit RF output level detector
  • User configurable thresholds and alarms

IBUC Advantages

Integrated BUC/SSPA for higher performance and reliability.

All models with integral AC power supply.

Internal 10MHz reference option automatically switches to internal reference when external reference is not detected.

Low phase noise better than IESS308/309 requirements by a minimum of 5 dB.

NMS‐friendly interfaces enable remote management of your earth station RF.

Embedded Web pages provide management for small networks using any Web browser.

AGC or ALC circuits hold gain or output level constant.

30 dB User‐adjustable gain in 0.1 dB steps preserves modem dynamic range.

Output sample port included.

Advanced user interfaces:

  • TCP/IP HTTP with embedded Web pages
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand‐held terminal

…for more Terrasat Communications Products

28 Feb

Terrasat Low Energy Consumption Ku-Band and C-Band IBUC 2’s

Satcom Resources is pleased to announce the addition of Terrasat’s new Ku-Band and C-Band Low Energy Consumption Intelligent Block Upconverters (IBUC 2)

Low Energy Consumption IBUC2 Advantages

Integrated BUC/SSPA for higher performance and reliability.

Low energy consumption (65W) for use with Modems equipped with limited capacity BUC power supplies. DC power supplied via IFL coax.

High linearity.

Low phase noise better than IESS308/309 requirements by a minimum of 5 dB.

Embedded Web pages provide management for small networks using any Web browser.

AGC or ALC circuits hold gain or output level constant. 30 dB User‐adjustable gain in 0.1 dB steps preserves modem dynamic range.
Advanced user interfaces:

  • TCP/IP HTTP with embedded Web pages via RJ‐45 connector
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand‐held terminal

IBUC2 offers significant benefits:

  • High performance in a compact, cost effective package
  • Simple design and installation
  • Simplified 1+1 configuration

New interfaces connect you to extensive M&C facilities for network management or local access. This powerful M&C enables:

  • Trouble‐free commissioning with easy, point‐and‐click installation/configuration
  • Continuous verification of performance with time‐stamped alarm history
  • Simplified monitoring of terminal status

IBUC2 comes with a complete set of diagnostic tools including:

  • 10 MHz input detector
  • Input voltage and current monitoring
  • Transmit L‐band input level detector
  • Transmit RF output level detector
  • User configurable thresholds and alarms

Unique to the IBUC are internal AGC and ALC functions that satisfy demanding applications with stringent specifications.

…for more Terrasat products

17 Feb

EDGE-AC Airline Checkable Flyaway Satellite Terminals

The EDGE AIR Series of Portable Flyaway Terminals are complete integrated systems designed to meet IATA weight requirements for air transportation. These terminals can provide almost instant access to internet, video and voice communications worldwide, and come in a full range of configurations with single and multi-band options.

EDGE-AIR terminals are integrated, assembled and tested, then packaged and shipped from our facilities in Avon, Colorado, so that you can have complete confidence that when your terminal arrives on-site, it will be ready to connect.

EDGE AC-100T 1.0M Portable Flyaway Terminal

The EDGE AC-100T Portable Satellite Terminal is a fully integrated, field proven, tri-band capable satellite terminal, in rugged airline-checkable cases.

Ready to be deployed worldwide in hours, these lightweight terminals are tripod-mounted for maximum setup flexibility. The EDGE AC-100T is available with Ku-, Ka- and X-Band configurations. BUCs, Modems, LNBs, color coded cables and simple instructions for fast, error-free setup are all included in this ready-to-use EDGE Satellite Terminal .

EDGE-AC Exede Pro Portable Terminal

The compact and lightweight EDGE Exede Pro-Portable Satellite Terminal can be quickly transported via commercial airline or delivered overnight by all major carriers.

With coverage across the Continental United States, Alaska and Hawaii, this customized terminal is ideal for SNG, disaster relief, and other time-critical applications. Setup on arrival at your location is accomplished in 10 minutes.

We’ve taken ViaSat’s popular Exede Pro-Portable Terminal a step further, offering exclusive configuration options including EDGE Voice options, Wi-Fi access points and more. All indoor appliances come pre-integrated in airline checkable roto-molded rack cases. Color coded cables and simple instructions for fast, error-free setup are all included in this ready-to-use EDGE Satcom Terminal.

14 Feb

EDGE-QD Quick Deploy / Flyaway Satellite Terminals

The EDGE-QD Quick Deploy / Flyaway VSAT Terminals are Satcom Resources’ line of fully integrated, ready-to-use flyaway satellite terminals. When a natural disaster or other emergency situation occurs, instant infrastructure is needed. With land-lines and cell towers disabled or overloaded, often the only form of long distance communication available is via satellite.

The EDGE-QD Flyaway VSAT Terminals are designed for field operation by news gathering agencies, non-technical first responders and military personnel, when other means to coordinate response efforts have failed, or don’t exist in the region.

Numerous pack-up options are available, from man-portable to air-freight compatible configurations. EDGE Terminals are available for world-wide operation in C-, Ku-, Ka- and X-Band over the appropriate satellite. We can provide the complete end-to-end solution to accomplish your mission, from integrated terminal to satellite segment service plan.

EDGE QD-120T 1.2M Flyaway Satellite Terminal

The EDGE QD-120T Flyaway Satellite Terminal arrives on-site in ruggedized cases, integrated, tested and ready to have you connected in minutes. The QD-120T is the result of years of collaboration with military and corporate end-users with stringent requirements for their telecommunication missions. The antenna can be assembled in less than 15 minutes by one man.

This highly flexible terminal is tripod-mounted and upgradeable to fully motorized operation for automatic satellite acquisition. The terminal is available in Ku-, C- and X-Band configurations. BUCs, Modems, LNBs, power supplies, color coded cables and simple instructions for fast, error-free setup are all included in this ready-to-use EDGE Satcom Terminal.

EDGE QD-180T 1.8M Flyaway Terminal

The EDGE QD-180T Flyaway Satellite Terminal is a motorized, Tri-Band capable system with an autolocate controller. Alternatively, the antenna can be configured manual (non-motorized), with autolocate assistance through a web browser. This allows an un-trained user to easily point the antenna without motorization. The antenna can be assembled in less than 15 minutes by one man.

This highly flexible terminal is tripod-mounted for maximum stability. The terminal is available with C-, X- and Ku-Band options. BUCs, Modems or Encoders, LNBs, power supplies, color coded cables and simple instructions for fast, error-free setup are all included.

31 Dec

Paradise High Power GaN Outdoor SSPAs

Teledyne Paradise Datacom’s newly packaged High Power Outdoor GaN SSPAs offer the latest in High Power Microwave Amplifier Technology.

The SSPA package achieves the highest power density in the industry.

A full compliment of serial and parallel control is available via circular connectors. An optional hand-held controller provides an interface for immediate local control.

A state of the art thermal platform provides efficient cooling for the amplifier module and power supplies. This ensures the highest possible MTBFs for microwave power amplifiers.

Features

  • Extremely High Power Density:
    • to 1.0 kW S-Band
    • to 800 W X-Band
    • to 800 W C-Band
    • to 400 W Ku-Band
  • RF Output Sample Port (-40dBc)
  • Remote Communication via RS232/485 or Ethernet
  • RF Gain Adjustment (20 dB)
  • Built-in 1:1 Redundancy Control

OPTIONS

  • RF Input Sample Port (-10 dBc)
  • L-Band Input operation
  • Reflected Power Monitor
  • Receive Band Reject Filter for S-Band units
  • Phase Combined Systems
  • Antenna Mounting Kit
  • Handheld controller

24 Dec

Paradise Datacom Compact Outdoor GaN SSPAs

The Paradise Datacom Compact Outdoor Solid State
Power Amplifier (SSPA)
is built for extreme environmental conditions and high reliability operation. Along with the robust construction exists the highest power density in the industry.

This allows solid state technology to be used in applications
that have long been reserved for TWTAs.

Starting at 44 lbs. (20 kg), and only slightly larger than a shoe
box, these SSPAs are available in output power levels of:

  • C-Band: 300W, 400W
  • X-Band: 300W, 400W
  • Ku-Band: 150W, 200W, 250W

Options

  • Antenna Mounting Kit
  • Remote Control Panel
  • L-Band Input
  • FSK monitor & control
    via IFL
  • Phase Combined Systems
  • Low line voltage operation
  • Fiber Optic Input
  • Optional side-mount AC
    input for SNG installations
  • Receive Band Reject Filter
    (S-Band only)

1:1 system w/ mounting frame

L-Band Operation

Teledyne Paradise Datacom offers C-, X-, and Ku-Band amplifiers with an integrated L-Band Block Up Converter. The L-Band units utilize Teledyne Paradise Datacom’s proprietary zBUCTM technology. The addition of a zBUC converter to a Compact Outdoor SSPA typically increases the gain by 2-4 dB. The advantages of zBUC technology include:

  • zBUC converters can detect and switch to an extenally supplied reference.
  • Optional internal high stability (10MHz) reference.
  • zBUC converters can lock to an externally supplied reference of 5, 10, 20, 25, or 50 MHz without modification.
  • zBUC converters can accept a wide range of external reference power (-10 to +5 dBm)
  • zBUC converters can accept FSK monitor and control signal via the IFL for complete amplifer remote control.

17 Dec

8W & 16W Universal Ku-Band BUCs with M&C

New Japan Radio’s 8W NJT8318U and 16W NJT8319U Universal Ku-Band BUCs are now available with M&C via MS connector or RS232.

NJT8318U

NJT8318U and NJT8319U Features

  • High Temperature Operation
    • Operation Guarantee Temperature Range:
      -40 to +75 degree C
  • RF Frequency Line-up
    • Universal Ku-Band: 13.75 to 14.5 GHz
  • High Efficiency Output Power (8W Model)
    • P1dB: +39 dBm min. over temperature
    • Power Consumption: 90 W max.
    • IM3: -28 dBc @ Pout <= +36 dBm
  • High Efficiency Output Power (16W Model)
    • P1dB: +42 dBm min. over temperature
    • Power Consumption: 170 W max.
    • IM3: -28 dBc @ Pout <= +39 dBm
  • FSK Modulation M&C
  • Smallest Size & Lightest Weight
    • Dimension: 180 (L) x 130 (W) x 80 (H) mm
    • Weight: 2.4 kg

11 Dec

NJRC NJT5763 10W Full C-Band BUC – NEW! at Satcom Resources

The NJT5763 10W Full C-Band BUC transmits in the RF Output Frequency: 5.85-6.725 GHz. Output Power @P1dB: 10W (+40 dBm). IF Frequency: 950-1825 GHz. Input Connector: Type N Female. Output Interface: CPR137 Waveguide Flange (with groove). Power Requirement: +24 / 48 VDC ( +18 to +60 VDC). Power Consumption: 85W max, Max. Weight: 3.2 kg (7.0 lbs) NJT5763 10W BUC

Features

  • High Efficiency & Low Distortion: P1dB: +40 dBm min. over temperature
  • IM3: -28 dBc @ Pout = +37 dBm
  • Power Consumption: 85W max
  • Wide Operating Range
    • Voltage Range: +18 to +60 VDC
  • Compact Size & Light Weight
    • Weight: 3.2 kg
  • LED Indicator
  • ROHS Compliance

10 Dec

NJT5762FA 10W C-Band BUC w/150W AC/DC Power Supply

The NJR NJT5762FA is a 10W C-Band BUC with 150W AC/DC Power Supply. RF Output Frequency: 5.85-6.425 GHz. Output Power @P1dB: 10W (+40 dBm). IF Frequency: 950-1525 GHz. Input Connector: Type F Female. Output Interface: CPR137 Waveguide Flange (with groove). DC Power supplied by 150W AC/DC PSU. Power Consumption: 69W typical/75W Max. Weight: 3.2 kg (7.0 lbs)

Features

  • High Efficiency & Low Distortion:
    • P1dB: +40 dBm min. over temperature
    • IM3: -28 dBc @ Pout = +37 dBm
    • Power Consumption: 69 W
  • AC Power Operation
    • DC Power supplied by 150W AC/DC PSU
  • Compact Size & Light Weight
    • Weight: 3.2 kg
  • LED Indicator
  • RoHS Compliance

150W AC/DC PSU

The 150W AC/DC Power Supply Unit (PSU) provides stable +48V DC power to operate 10W C-Band BUCs when the modem power supply is not adequate.
The PSU contains a bias-tee to pass the 10MHz reference and L-Band IF signals from the modem.

06 Dec

O3B Network Ka-Band 10W BUCs NEW! at Satcom Resources

New Japan Radio’s O3B Networks Ka-Band 10W BUC upconverts an L-Band IF signal to Ka-Band (27.652 to 29.071 GHz) and can be used with any network that requires a high quality Ka-Band SSPA with Upconverter.

The NJT5836L transmits 10W Output Power (+40 dBm) over 27.652 to 28.388 GHz, LO frequency: 26.600 GHz, IF Frequency: 1052 to 1788 MHz, Power Requirement: +22 to +56 V DC, N-type female input connector (50 ohm), WR28 Waveguide w/groove output.

The NJT5836H transmits 10W Output Power (+40 dBm) over 28.172 to 29.071 GHz, LO frequency: 27.200 GHz, IF Frequency: 972 to 1871MHz, Power Requirement: +22 to +56 V DC, N-type female input connector (50 ohm), WR28 Waveguide w/groove output.

NJT5836 Features

  • RF Frequency:
    • 27.652 – 28.388 GHz with 26.600 GHz LO
    • 28.172 – 29.071 GHz with 27.200 GHz LO
  • High Efficiency Output Power
    • Saturation Output Power: +40 dBm (10W)
    • ACPR: -25 dBc max. with up to +37 dBm output
    • Power Consumption: 170 W max.
    • Gain Control: 15 dB range, 1 dB step
    • Power Monitor: 12 dB dynamic range
  • Ethernet M&C Function Equipped
  • Reliable All-weather Performance

Subscribe

Search