10 Dec

NJT5762FA 10W C-Band BUC w/150W AC/DC Power Supply

The NJR NJT5762FA is a 10W C-Band BUC with 150W AC/DC Power Supply. RF Output Frequency: 5.85-6.425 GHz. Output Power @P1dB: 10W (+40 dBm). IF Frequency: 950-1525 GHz. Input Connector: Type F Female. Output Interface: CPR137 Waveguide Flange (with groove). DC Power supplied by 150W AC/DC PSU. Power Consumption: 69W typical/75W Max. Weight: 3.2 kg (7.0 lbs)

Features

  • High Efficiency & Low Distortion:
    • P1dB: +40 dBm min. over temperature
    • IM3: -28 dBc @ Pout = +37 dBm
    • Power Consumption: 69 W
  • AC Power Operation
    • DC Power supplied by 150W AC/DC PSU
  • Compact Size & Light Weight
    • Weight: 3.2 kg
  • LED Indicator
  • RoHS Compliance

150W AC/DC PSU

The 150W AC/DC Power Supply Unit (PSU) provides stable +48V DC power to operate 10W C-Band BUCs when the modem power supply is not adequate.
The PSU contains a bias-tee to pass the 10MHz reference and L-Band IF signals from the modem.

06 Dec

O3B Network Ka-Band 10W BUCs NEW! at Satcom Resources

New Japan Radio’s O3B Networks Ka-Band 10W BUC upconverts an L-Band IF signal to Ka-Band (27.652 to 29.071 GHz) and can be used with any network that requires a high quality Ka-Band SSPA with Upconverter.

The NJT5836L transmits 10W Output Power (+40 dBm) over 27.652 to 28.388 GHz, LO frequency: 26.600 GHz, IF Frequency: 1052 to 1788 MHz, Power Requirement: +22 to +56 V DC, N-type female input connector (50 ohm), WR28 Waveguide w/groove output.

The NJT5836H transmits 10W Output Power (+40 dBm) over 28.172 to 29.071 GHz, LO frequency: 27.200 GHz, IF Frequency: 972 to 1871MHz, Power Requirement: +22 to +56 V DC, N-type female input connector (50 ohm), WR28 Waveguide w/groove output.

NJT5836 Features

  • RF Frequency:
    • 27.652 – 28.388 GHz with 26.600 GHz LO
    • 28.172 – 29.071 GHz with 27.200 GHz LO
  • High Efficiency Output Power
    • Saturation Output Power: +40 dBm (10W)
    • ACPR: -25 dBc max. with up to +37 dBm output
    • Power Consumption: 170 W max.
    • Gain Control: 15 dB range, 1 dB step
    • Power Monitor: 12 dB dynamic range
  • Ethernet M&C Function Equipped
  • Reliable All-weather Performance

13 Nov

Ateme IRDs and Encoders now at Satcom Resources

Satcom Resources is happy to announce a new affiliation with the French broadcast equipment firm Ateme, makers of the Kyrion CM5000 Modular Contribution Encoder, the Kyrion DR5000 SD/HD MPEG-2 / MPEG-4 IRD, and the Kyrion DR8100 SD/HD MPEG-2/MPEG-4 IRD.

Kyrion DR8100 SD/HD MPEG-2/MPEG-4 Integrated Receiver Decoder

ATEME’s line of professional Integrated Receiver Decoders is a set of cost-effective solutions for the distribution of video services.

The IRDs are designed for SD applications and offer an upgrade path to HD, allowing operators to leverage their existing SD infrastructures with a solution in place for HD migration.

The series is fully compliant with DVB and ATSC standards. The IRD line offers today’s video professional a satellite inputs or IP inputs with additional ASI input. The IRD provides high quality MPEG2 and MPEG-4 decoding of SD and HD video formats with SDI outputs. Kyrion® DR8100 Integrated Receiver are designed to match professional turnaround applications and confidence monitoring.

Kyrion DR5000 SD/HD MPEG-2 / MPEG-4 Integrated Receiver Decoder

The Kyrion™ DR5000 is ATEME’s latest Integrated Receiver Decoder dedicated to professional contribution over satellite and IP / ASI networks. Kyrion DR5000 is a single channel decoder with outstanding capabilities, providing easy setup and fast signal lock while achieving great robustness that meets all operational requirements.

Kyrion DR5000 is able to receive video feeds on 4 selectable RF inputs, 2 ASI inputs and 2 IP inputs. Capable of decoding all profiles from Standard Definition to High Definition, either MPEG-2 4:2:0 or 4:2:2 or MPEG-4 4:2:0 and 4:2:2 up to 10-bit, it can address any field use case. Based on optimized design and compact form factor, Kyrion DR5000 yield operational efficiencies and can be entitled as a green solution.

Leveraging ATEME ‘s unique FPGA design, Kyrion DR5000 permits a complete software upgradeability SD to HD or 4:2:0 to 4:2:2, providing the broadcasters, satellite up-links, service operators, and the DSNG Users to benefit from the state-of-art of video compression standards.

Kyrion CM5000 Modular Contribution Encoder

The Kyrion™ CM5000 is a new modular hardware encoder dedicated to contribution over satellite, IP and ASI networks. It can be mounted as a single or dual channel encoder, or single channel encoder and DVB-S/S2 modulator. Optional audio boards for analog or digital inputs can be added on two extension slots.

The Kyrion CM5000 delivers all MPEG-2 and MPEG-4 AVC video compression flavors: from SD to HD and 1080p50/60, and from 4:2:0 8-bit up to 4:2:2 10-bit with unrivaled video quality and reliability.

The CM5000 front panel and web interfaces meet all operational expectations with quick access to configuration menus and immediate settings ensuring afast transmission start.

Based on ATEME’s unique FPGA design, the Kyrion CM5000 is fully upgradeable and future proof, allowing broadcasters,satellite up-links, service operators, and DSNG professionals to benefit from the state-of-art in video compression technology.

12 Nov

NJRC 150W BUC Power Supplies

The NJRC NJZ 1286 Power Supply Unit (PSU) provides stable +48 VDC power to operate both 10W C-Band and 8W Ku-Band BUCs when the modem power supply is not sufficient.

The 150W AC/DC PSU includes a bias-tee to pass 10 MHz reference and L-Band IF signal (950 – 1700 MHz) from the modem, and has a corrosion-proof aluminum housing for indoor use.

31 Oct

SAILOR FleetBroadband Special Pricing

The SAILOR FleetBroadband systems provide secure, compact and reliable communications systems, tailored to suit your maritime needs. Including:
SAILOR 150, SAILOR 250, and SAILOR 500 FleetBroadband, we are currently offering huge discounts on these already affordable systems.

SAILOR® 150 FLeetBroadband

The SAILOR 150 FleetBroadband is a compact, lightweight, easy to install and affordable communication system that provides reliable internet access, email and multiple voice lines. Using the same proven technology as SAILOR’s heavy-use FleetBroadband solutions, SAILOR 150 FleetBroadband combines internet connectivity with simultaneous voice calling, ideal for single users and general IP applications.

SAILOR® 250 FLeetBroadband

With data speeds up to 284 kbps from a compact, lightweight and simple to install antenna, SAILOR 250 FleetBroadband is the perfect balance between performance and price. It gives you fast data connectivity and voice simultaneously, allowing you to run online operational systems such as remote monitoring, whilst still having access to e-mail, intranet/internet and multiple voice lines.

SAILOR® 500 FleetBroadband

The SAILOR 500 FleetBroadband is designed for vessels and platforms with demanding requirements for connectivity. It meets the critical needs for voice and data communication of maritime and offshore professionals globally but despite its power, is a compact, lightweight solution. It provides extensive functionality including full access to bandwidth-hungry IP applications, broadband internet/intranet, e-mail, secure VPN and nine simultaneous voice lines.

29 Oct

Terrasat IBUC G – GaN Intelligent Block Upconverter

The revolutionary Terrasat IBUC G GaN Block Upconverter has advanced features to take your network to new heights.

IBUC G Benefits

  • Low terminal cost
  • Simple design and installation
  • Superior RF performance
  • Simplified 1+1 configuration

New interfaces connect you to the IBUC’s extensive M&C facilities for network management or local access. This powerful new M&C enables:

  • Trouble-free commissioning with easy, point-and-click installation/configuration
  • Continuous verification of performance with time-stamped alarm history
  • Simplified monitoring of terminal status

The IBUC comes with a complete set of diagnostic tools including:

  • 10 MHz input detector
  • Input voltage and current monitoring
  • Transmit L-band input level detector
  • Transmit RF output level detector
  • User configurable thresholds and alarms

Unique to the IBUC are internal AGC and ALC functions that satisfy demanding
applications with stringent specifications.

IBUC G Advantages

  • Integrated BUC/SSPA for higher performance and reliability.
  • Integral AC power supply.
  • Internal 10MHz reference option automatically switches to internal reference when external reference is not available.
  • Low phase noise exceeds IESS308/309 requirements by a minimum of 5 dB.
  • NMS-friendly interfaces enable remote management of your earth station RF.
  • Embedded Web pages provide management for small networks using any Web browser.
  • AGC or ALC circuits hold gain or output level constant.
  • 30 dB User-adjustable gain in 0.1 dB steps preserves modem dynamic range.
  • Output sample port included.

Advanced user interfaces:

  • TCP/IP HTTP with embed-ded Web pages via RJ45 user interface connector
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

…for more Terrasat Products

22 Oct

Newtec MDM6000 High Speed Satellite Modem

The Newtec MDM6000 High Speed Satellite Modem is the next generation modem optimized for point-to-point very high speed applications over satellite. In combination with the NOP1760 Bandwidth Manager the modem achieves barrier-breaking speeds at the highest bandwidth efficiency and maximum service availability.

Efficiency at the Core

The Newtec MDM6000 Satellite Modem high speed solution combines a number of innovative elements to improve current market available efficiencies, thereby lowering the overall Total Cost of Ownership.

New modulation and Forward Error Correction (FEC) codes up to 64APSK (which can be seen as demonstrator of possible extensions in the DVB-S2 standard) in combination with innovative technologies such as 72 Mbaud wideband support, Clean Channel Technology™, Automatic Uplink Power Control (AUPC), FlexACM® and Automated Equalink® are embedded in the solution and bring the satellite link to full efficiency. By increasing the amount of data that can be transferred per transponder the MDM6000 modem effectively increases business opportunities for Service Providers. The performance can be increased even more by adding Newtec’s bandwidth cancellation
and/or network optimization technologies.

Optimal Availability

Newtec’s auto-adaptive technology FlexACM® is incorporated in the MDM6000 Satellite Modem solution and deals with fading conditions (rain, dust, interference) and inclined orbit satellites with varying throughput patterns.

Thanks to FlexACM® these fading conditions will no longer interrupt the transmission between the hub and remote sites nor result in loss of data. The maximum possible throughput can be achieved at all times.

Additionally the Automatic Uplink Power Control mechanism can ensure maximum use of the linkbudget at all times.

Flexibility and Scalability Matching Market’s Business Models

The modem provides a scalable and flexible platform which allows the customers to grow depending on their application and investment plan. The MDM6000 platform can start as a modulator or demodulator unit and grow into a modem with different functionalities by simple license upgrades.

At the output of the MDM6000 Modem, the signal is available in IF or extended L-band (950 MHz-2150 MHz). 24V/48V DC BUC Power and 10 MHz reference can be multiplexed on the L-band modulator output via software configuration. At the receive side the modem has dual L-band or optional IF and L-band input. The active input is selected by the user and can provide DC power and frequency band selection signals compatible with most professional and commercial LNBs providing a compact and cost effective solution.

The Satellite Modem can be easily monitored and controlled via a comprehensive front panel menu, advanced web GUI as well as via SNMP protocol. This enables easy integration into any industry- standard EMS/NMS system.

MDM6000 Features

  • Data rates up to 380Mbit/s bi-directional for handling new high-speed applications and lower TCO
  • Baudrates upto 72Mbaud to handle all common transponder sizes
  • Clean Channel TechnologyTM for additional bandwidth efficiency gains by allowing optimal carrier spacing
  • DVB-S2 and optional S2 Extensions (up to 64APSK) for optimal use of allocated bandwidth
  • Optional Automated Equalink® Pre-distortion for optimal use of semi-saturated Transponders
  • Reduce impact of RF Interferences (RFI) by enabling the optional DVB RF Carrier ID (DVB-CID)
  • All modcods and baudrates default enabled for flexible and optimal operation of the network
  • Automatic Uplink Power Control for combating uplink fading
  • Optional FlexACM® for adaptive environments like variable interferences from rain and dust or for inclined orbit operation
  • Standard GSE encapsulation for minimal overhead
  • Adaptive traffic shaping and bandwidth management allowing maximal SLA adherence even in case of ACM
  • Advanced Quality of Service (QoS) for better customer experience
  • Easy integration with terrestrial data networks
  • Easy operation through secure frontpanel, SNMP, HTTP and CLI interfaces

Architecture

To obtain the very high speeds over satellite the MDM6000 High Speed Satellite Modem consists of a MDM6000 Satellite Modem and the NOP1760 Bandwidth Manager. To maximise efficiency in point-to-point applications the MDM6000 High Speed modem solution can be combined with the BW0900 Bandwidth Canceller.

…for more Newtec products.

24 Sep

Comtech CDM-625A Advanced Satellite Modem

The Comtech EF Data CDM-625A Advanced Satellite Modem builds on a legacy of providing the most efficient satellite modems. With support for VersaFEC® Forward Error Correction (FEC), the revolutionary DoubleTalk® Carrier-in-Carrier® bandwidth compression, additional rolloffs and advanced packet processing, the CDM-625A provides significant savings under all conditions.

This combination of advanced technologies enables multi-dimensional optimization, allowing satellite communications users to:

  • Minimize operating expenses (OPEX)
  • Maximize throughput without using additional transponder resources
  • Maximize availability (margin) without using additional transponder resources
  • Minimize capital expenses (CAPEX) by allowing a smaller BUC/HPA and/or antenna
  • Or, a combination to meet specific business needs

CDM-625A Typical Users

  • Mobile Network Operators
  • Telecom Operators
  • Satellite Service Providers
  • Government & Military
  • Enterprise
  • Offshore

Common Applications

  • Mobile Backhaul
  • G.703 Trunking
  • IP Trunking
  • Offshore & Maritime Communications
  • Enterprise
  • Communications on-the-Move
  • Satellite News Gathering

CDM-625A Features

  • DoubleTalk Carrier-in-Carrier bandwidth compression
  • Carrier-in-Carrier Automatic Power Control
  • VersaFEC FEC with Adaptive Coding and Modulation (ACM)
  • 5%, 10%, 15%, 20%, 25% and 35% Filter Rolloff
  • Packet Processor with header compression, payload compression, advanced Quality of Service (QoS) and Managed Switch Mode with VLAN support
  • Integrated 4-port managed Ethernet switch with VLAN and QoS
  • Jumbo frame support
  • Dual Band Capability: 70/140 MHz and extended L-Band (950 – 2250 MHz) in same unit
  • Data Rate: 18 kbps to 25 Mbps
  • Symbol Rate: 18 ksps to 12.5 Msps
  • Modulation: BPSK, QPSK/OQPSK, 8PSK/8-QAM, 16-QAM
  • FEC: Viterbi, Sequential, Concatenated Reed Solomon, TCM, Turbo Product Code (TPC) (IESS-315 Compliant), LDPC Code and VersaFEC (low-latency LDPC)
  • Widest Range of data interfaces: EIA-422/530, V.35, G.703 T1, G.703 E1, G.703 T2, G.703 E2, Quad G.703 E1, ASI, LVDS, HSSI, 4-port 10/100Base-T Ethernet
  • IEEE 1588v2 Precision Time Protocol
  • Sub Mux to multiplex IP/Ethernet traffic with serial or G.703 traffic
  • Drop & insert for T1/E1
  • Enhanced D&I++ for single T1/E1 & quad E1
  • Management: 10/100Base-T Ethernet with SNMP, Distant End SNMP Proxy, HTTP, Telnet and EIA-232/EIA-485
  • Carrier ID using MetaCarrier® Technology
  • Embedded Distant-end Monitor and Control (EDMAC)
  • Automatic Uplink Power Control (AUPC)
  • Engineering Service Channel (ESC/ESC++)
  • Standard high-stability internal reference (± 6 x 10-8)
  • 5-tap Adaptive Equalizer
  • L-Band TX: 10 MHz reference for BUC, FSK communications and optional BUC power supply
  • L-Band RX: 10 MHz reference and LNB power supply
  • L-Band: Advanced FSK for LPOD M&C
  • 1:1 and 1:10 redundancy switches available
  • Backwards compatible with CDM-625

Doubletalk Carrier-in-Carrier

DoubleTalk Carrier-in-Carrier, based on patented “Adaptive Cancellation” technology, allows transmit and receive carriers of a duplex link to share the same
transponder bandwidth. DoubleTalk Carrier-in-Carrier is complementary to all advances in modem technology, including advanced FEC and modulation techniques. As
these technologies approach theoretical limits of power and bandwidth efficiencies, DoubleTalk Carrier-in-Carrier utilizing advanced signal processing techniques
provides a new dimension in bandwidth efficiency.

Figure 1 shows the typical full-duplex satellite link, where the two carriers are adjacent to each other.

Figure 2 shows the typical DoubleTalk Carrier-in-Carrier operation, where the two carriers are overlapping, thus sharing the same spectrum.

When observed on a spectrum analyzer, only the Composite is visible. Carrier 1 and Carrier 2 are shown in Figure 2 for reference only.
As DoubleTalk Carrier-in-Carrier allows equivalent spectral efficiency using a lower order modulation and/or code rate, it can reduce the power required to close the link
thereby reducing CAPEX by allowing a smaller BUC/HPA and/or antenna. Alternatively, DoubleTalk Carrier-in-Carrier can be used to achieve very high spectral efficiencies E.g.,
DoubleTalk Carrier-in-Carrier when used with 16-QAM approaches the bandwidth efficiency of 256-QAM (8 bps/Hz).

When combined with VersaFEC or LDPC/TPC, it can provide unprecedented savings in transponder bandwidth and power utilization. This allows for its successful deployment in
bandwidth-limited and power-limited scenarios, as well as reduction in earth station BUC/HPA power requirements.

Carrier-in-Carrier Automatic Power Control (CnC-APC)

The patent-pending Carrier-in-Carrier Automatic Power Control (CnC-APC) mechanism enables modems on both sides of a CnC link to automatically measure and compensate for rain
fade while maintaining the Total Composite Power. In addition to automatically compensating for rain fade, CnC-APC also enables the modems to share link margin, i.e. a modem
in clear sky conditions can effectively transfer excess link margin to a distant end modem experiencing fade, thereby further enhancing overall availability.

VersaFEC Forward Error Correction

CDM-625A offers VersaFEC, a patent-pending system of high-performance LDPC codes designed to provide maximum coding gain while minimizing latency. VersaFEC is designed to
support ACM and CCM mode of operation.

The Ultra Low Latency (ULL) codes provide even lower latency compared to standard VersaFEC codes.

Adaptive Coding & Modulation (ACM)

Satellite users have traditionally relied on worst case link margin to overcome rain fade which leads to significant inefficiencies. ACM can provide significant increase in
throughput as well as availability. ACM converts the fade margin into increased capacity making it possible to more than double the throughput for Ku-Band operation. Even
under deep fade, ACM may be able to maintain the link at the lower MODCOD thereby increasing availability. It is tightly integrated with packet processor QoS which allows
higher priority, mission critical traffic to be maintained even during fade.

Low Density Parity Check Codes (LDPC) & Turbo Product Codes (TPC)

CDM-625A offers an integrated LDPC and 2nd Generation TPC codec. LDPC is an advanced Forward Error Correction technique capable of providing performance much closer to Shannon
limit. The current LDPC implementation can provide 0.7 to 1.2 dB additional coding gain compared to an equivalent TPC code.

…for more Satellite Modems

16 Sep

Ericsson RX9500 Bulk Descrambler

The Ericsson RX9500 Bulk Descrambler provides Cable, IPTV, and other Direct to Home operators with the capability to efficiently turn-around encrypted and free to air content from satellite platforms.

The RX9500 allows operators to demodulate and descramble 10s or 100s of services from multiple satellite transponders within a high density, low rack unit occupancy solution.

The RX9500 forms part of Ericsson’s Multi-Platform Headend Solution, interfacing seamlessly with Ericsson’s encoders and transcoders. The RX9500 Bulk Descrambler is simple to set up and configure offering the benefit of a single management, control and monitoring solution for the complete turn-around system through Ericsson’s nCompass Control platform.

RX9500 Descrambler Overview

Channel Density
The RX9500 Bulk Descrambler allows operators to turn-around 10s or hundreds of satellite delivered services within a high density, low rack occupancy solution. The RX9500 can be configured to process up to 6 satellite multiplexes of scrambled or free to air content.

Common Interface Descrambling
The RX9500 Bulk Descrambler is able to descramble services via DVB Common Interface modules ensuring that all frequently used CA systems can be addressed. The RX9500 allows two CAMs to be used per satellite multiplex—ensuring that a high density of services can be descrambled and allows for multiple CA systems on a transponder.

Simple Architecture
The RX9500 Bulk Descrambler exemplifies the benefits of a simple architecture. Each satellite multiplex is processed as siloed modules without dependency on other inputs. Each descrambled or FTA channel is output as an easy to manage single program transport stream on IP interfaces allowing the down-stream equipment to effectively process the services.

One System, One Management Platform
Through Ericsson’s Multi-Platform Headend Solution operators can deploy a complete content turn-around solution—where each element can seamlessly interface with the other elements; all monitored and controlled by nCompass Control as a single overarching control platform.

Why Ericsson
The Ericsson RX9500 Bulk Descrambler provides all the necessary elements to acquire channel content for a DTH turn-around platform. More importantly the RX9500 forms part of a single, fully integrated, managed end-to-end system.

HARDWARE OPTIONS

The RX9500 Bulk Descrambler allows operators to equip and scale their unit for the density they require by fitting up to 6 satellite input/descrambler cards.

Satellite input Common Interface descrambling card (RX9500/HWO/SAT/CI)

  • 1x satellite input
  • DVB-S, DVB-S2 capable
  • 2x DVB Common Interface Conditional Access Module slots
  • Up to 6 cards per chassis

SOFTWARE OPTIONS

Input Options
The RX89500 Bulk Descrambler is enabled for DVB-S reception as standard. The unit can also be entitled to support the DVB-S2 satellite transmission standard.

DVB-S2 QPSK License
(RX9500/SWO/DVBS2/QPSK)

  • Adds DVB-S2 QPSK capability to DVB-S2 satellite input card
  • One licence per satellite card as required

DVB-S2 8PSK License
(RX9500/SWO/DVBS2/8PSK

  • Adds DVB-S2 QPSK, 8PSK capability to DVB-S2 satellite input card
  • One licence per satellite card as required

DVB-S2 16APSK License
(RX9500/SWO/DVBS2/16APSK)

  • Adds DVB-S2 QPSK, 8PSK, 16APSK and 32APSK capability to DVB-S2 satellite input card
  • One licence per satellite card as required

Descrambling Options
The RX89500 Bulk Descrambler supports DVB Common Interface conditional access. Each satellite input/descrambling card can host 2 Common Interface Conditional Access Modules to provide high service density descrambling or allow for multiple CA systems.

DVB Common Interface Multi-Service Descrambling License (RX9500/SWO/CI/MSD)

  • Enables Common Interface multi-service descrambling for the unit

…for more Ericsson products

28 Aug

CPI/CODAN Ku-Band GaN 40W Mini-BUC

The CPI/Codan Ku-Band GaN 40W Mini-BUC brings Gallium Nitride (GaN) HEMT technology to Codan’s Mini-BUC line.

CPI/Codan’s extensive experience in the design and manufacture of Satellite Communication RF subsystems has resulted in high quality performance and a strong reliability record. Thousands of systems have been deployed by hundreds of satisfied customers in every corner of the globe.

Purpose designed and built for VSAT stabilised platforms and satcom-on-the-move customers, the latest Mini-BUC product offers outstanding performance few can match.

New Technology

CPI/Codan is pleased to bring state-of-the-art Gallium Nitride (GaN) HEMT technology to our Mini-BUC platform. This new technology has enabled us to produce a BUC which puts out significantly higher power, is smaller and lighter, and is more efficient than older technology products.

The highlights of the new product include:
Better power efficiency

  • ƒƒ 250 W typical AC power (16% efficiency)
  • Better power to size/weight ratio

    • ƒƒ Packaged in a 4 kg LAN Mini-BUC

    Trusted CPI/Codan Features and Performance

    Though we have embraced new technology to advance our BUC designs, CPI/Codan continues to offer the same trusted performance and features typically demanded by our customers. Our products are fully capable of deployment in extremely harsh environments featuring wide temperature variations and tough climatic conditions.

    A range of accessories is available that includes 10 MHz reference sources and a full range of redundancy switching solutions for high value sites carrying critical data traffic and requiring 100% on-air availability.

    3 year warranty

    CPI/Codan RF Products continue to be supplied with a market-leading 3 year warranty and dedicated support organization.

    Features

    • Robust thermal design
      specifically for:

      • ƒƒ Maximum heat dissipation
      • High temperature tolerance
    • ƒƒ Small & lightweight
      • ƒƒ Direct feed mount
      • For ease of handling and one
        person installation
    • ƒƒ Comprehensive Monitor & Control functionality
      • ƒƒ Accessible anytime, anywhere via Internet or your mobile phone
      • Integrate with SNMP to your NMS
      • Enables effective operational management and minimises network outage
    • ƒƒ Operating status visual display monitor for easy field analysis
    • ƒƒ Guaranteed specifications and superior phase noise and gain characteristics
      • ƒƒ Excellent TDMA and multi-carrier performance
      • ƒƒ Specifications you can trust
    • ƒƒ Internal self-resetting protection:
      • ƒƒ Against high temperatures
      • Open/short/overdrive
        RF output conditions
      • INT/EXT Reference
        10 MHz conditions
      • Supply fluctuations, brownouts and blackouts

    …for more 30-80W Ku-Band Block Upconverters

Subscribe

Search