December, 2013

31 Dec

Paradise High Power GaN Outdoor SSPAs

Teledyne Paradise Datacom’s newly packaged High Power Outdoor GaN SSPAs offer the latest in High Power Microwave Amplifier Technology.

The SSPA package achieves the highest power density in the industry.

A full compliment of serial and parallel control is available via circular connectors. An optional hand-held controller provides an interface for immediate local control.

A state of the art thermal platform provides efficient cooling for the amplifier module and power supplies. This ensures the highest possible MTBFs for microwave power amplifiers.

Features

  • Extremely High Power Density:
    • to 1.0 kW S-Band
    • to 800 W X-Band
    • to 800 W C-Band
    • to 400 W Ku-Band
  • RF Output Sample Port (-40dBc)
  • Remote Communication via RS232/485 or Ethernet
  • RF Gain Adjustment (20 dB)
  • Built-in 1:1 Redundancy Control

OPTIONS

  • RF Input Sample Port (-10 dBc)
  • L-Band Input operation
  • Reflected Power Monitor
  • Receive Band Reject Filter for S-Band units
  • Phase Combined Systems
  • Antenna Mounting Kit
  • Handheld controller

24 Dec

Paradise Datacom Compact Outdoor GaN SSPAs

The Paradise Datacom Compact Outdoor Solid State
Power Amplifier (SSPA)
is built for extreme environmental conditions and high reliability operation. Along with the robust construction exists the highest power density in the industry.

This allows solid state technology to be used in applications
that have long been reserved for TWTAs.

Starting at 44 lbs. (20 kg), and only slightly larger than a shoe
box, these SSPAs are available in output power levels of:

  • C-Band: 300W, 400W
  • X-Band: 300W, 400W
  • Ku-Band: 150W, 200W, 250W

Options

  • Antenna Mounting Kit
  • Remote Control Panel
  • L-Band Input
  • FSK monitor & control
    via IFL
  • Phase Combined Systems
  • Low line voltage operation
  • Fiber Optic Input
  • Optional side-mount AC
    input for SNG installations
  • Receive Band Reject Filter
    (S-Band only)

1:1 system w/ mounting frame

L-Band Operation

Teledyne Paradise Datacom offers C-, X-, and Ku-Band amplifiers with an integrated L-Band Block Up Converter. The L-Band units utilize Teledyne Paradise Datacom’s proprietary zBUCTM technology. The addition of a zBUC converter to a Compact Outdoor SSPA typically increases the gain by 2-4 dB. The advantages of zBUC technology include:

  • zBUC converters can detect and switch to an extenally supplied reference.
  • Optional internal high stability (10MHz) reference.
  • zBUC converters can lock to an externally supplied reference of 5, 10, 20, 25, or 50 MHz without modification.
  • zBUC converters can accept a wide range of external reference power (-10 to +5 dBm)
  • zBUC converters can accept FSK monitor and control signal via the IFL for complete amplifer remote control.

20 Dec

Mobile Satellite TV Antennas for DISH and DIRECTV

Satcom Resources is pleased to offer our clients Mobile Satellite TV Antennas for DISH and DIRECTV, from Winegard, a global innovator of Satellite TV Antennas for RVs, Campers and other mobile applications.

Carryout GM-1599 Realtree® Camouflage Portable Automatic Satellite Antenna

With the Carryout GM-1599 Automatic Satellite TV Antenna with Realtree AP™ Camouflage you see the television, not the antenna. This light, portable satellite dish eliminates dish aiming with easy automatic setup. The Carryout will support more than one receiver, so you can watch different programs on different televisions!

Carryout Features

  • Standard & HD DISH
  • Standard DIRECTV
  • Bell Standard & HD
  • Also compatible with Eastern Arc satellites
  • One button operation
  • Supports up to two receivers

Trav’ler DISH SK-1000 Multi-Satellite TV Antenna

With the Trav’ler DISH 1000 you can view all satellites at the same time! Watch all your favorite DISH and Bell TV programming in high definition, on any TV in the RV. The reflectors are certified and approved to provide the strongest signal strength under adverse weather conditions.

Trav’ler DISH 1000 Features

  • DISH Standard and High Definition
  • Bell Standard and High Defiinition
  • Designed for easy installation
  • Strongest signal strength
  • Simultaneous multi-pointing
  • Up to 3 receivers supported (expandable)
  • Stows to less than 10″ travel height when not in use

SK-SWM3 DIRECTV Slimline Mobile Automatic Antenna

Get HD that domes can’t! The SK-SWM3 DIRECTV Slimline is the only mobile automatic antenna to offer maximum DIRECTV HD programming.

Never miss your favorite shows again with the power of multi-satellite viewing. Watch any program on any TV in the RV. Made with approved and certified reflectors to provide the strongest signal strength.

The Full DIRECTV HD Experience

Winegard is proud to be the first to provide RVers with the only solution for maximum DIRECTV HD programming.

  • Supports all new DIRECTV HD receivers.
  • Provides simultaneous reception from 99°, 101° and 103° for complete SD and HD programming.
  • Record and watch in any room with one DIRECTV HD DVR.

Multi-Satellite Viewing

View all satellites at the same time for maximum programming. Never miss your favorite show again! Watch any program, on any TV in the RV, at the same time!

  • Family friendly – watch different programs on a variety of TVs at the same time.
  • Great to use with DVRs – watch and record from different satellites simultaneously.

PATHWAY X2 ANTENNA WITH DISH VIP 211Z RECEIVER BUNDLE

The Winegard Pathway X2 is 100% automatic, and self installs faster than other antennas. The X2 runs through the ViP series receiver menu using the new DISH mobile protocol. Just set your state and the X2 does the rest!

Pathway X2 accesses all DISH satellites everywhere in the United States. Uses both the Western Arc (110°, 119° and 129°) orbital locations and the Eastern Arc (61.5°, 72.7° and 77°) single orbitals.

The Pathway X2 is powered through the coaxial cable from the satellite receiver. Just one wire, no power cable needed!

Pathway X2 Features

  • Compatible with DISH programming
    and DISH Solo HD receivers
  • Supports up to two receivers
  • For stationary use only
  • Includes 25 ft coaxial cable
  • UV-protected plastic reflector cover
  • Gray plastic base
  • Made in USA

17 Dec

8W & 16W Universal Ku-Band BUCs with M&C

New Japan Radio’s 8W NJT8318U and 16W NJT8319U Universal Ku-Band BUCs are now available with M&C via MS connector or RS232.

NJT8318U

NJT8318U and NJT8319U Features

  • High Temperature Operation
    • Operation Guarantee Temperature Range:
      -40 to +75 degree C
  • RF Frequency Line-up
    • Universal Ku-Band: 13.75 to 14.5 GHz
  • High Efficiency Output Power (8W Model)
    • P1dB: +39 dBm min. over temperature
    • Power Consumption: 90 W max.
    • IM3: -28 dBc @ Pout <= +36 dBm
  • High Efficiency Output Power (16W Model)
    • P1dB: +42 dBm min. over temperature
    • Power Consumption: 170 W max.
    • IM3: -28 dBc @ Pout <= +39 dBm
  • FSK Modulation M&C
  • Smallest Size & Lightest Weight
    • Dimension: 180 (L) x 130 (W) x 80 (H) mm
    • Weight: 2.4 kg

13 Dec

ATEME Kyrion DR8400 SD/HD MPEG-2/MPEG-4 Decoder

The Kyrion™ DR8400 is a Universal Integrated Receiver/ Decoder supporting all MPEG profiles including MPEG-4 4:2:2 10-bit and latest HEVC.

The DR8400 is designed for contribution markets where premium quality and performance are more important than ever.

The DR8400 gives by default 3 different input types: built-in DVB-S/S2 demodulator, IP Gigabit and ASI with a TS bit rate of up to 200Mbps. Combined with a decoding bit rate reaching 110Mbps with no compromise in CABAC, the DR8400 is addressing a large spectrum of contribution applications or primary distribution.

By offering the first H.264 4:2:2 10-bit solution, ATEME takes another technology step improving Video Quality over 8-bit. The DR8400 in combination with CM4101 secures your Video Quality end to end, completing the Video Quality chain from Primary Contribution point to Distribution point offering the highest restitution fidelity.

…for more Integrated Receiver Decoders (IRDs)

11 Dec

NJRC NJT5763 10W Full C-Band BUC – NEW! at Satcom Resources

The NJT5763 10W Full C-Band BUC transmits in the RF Output Frequency: 5.85-6.725 GHz. Output Power @P1dB: 10W (+40 dBm). IF Frequency: 950-1825 GHz. Input Connector: Type N Female. Output Interface: CPR137 Waveguide Flange (with groove). Power Requirement: +24 / 48 VDC ( +18 to +60 VDC). Power Consumption: 85W max, Max. Weight: 3.2 kg (7.0 lbs) NJT5763 10W BUC

Features

  • High Efficiency & Low Distortion: P1dB: +40 dBm min. over temperature
  • IM3: -28 dBc @ Pout = +37 dBm
  • Power Consumption: 85W max
  • Wide Operating Range
    • Voltage Range: +18 to +60 VDC
  • Compact Size & Light Weight
    • Weight: 3.2 kg
  • LED Indicator
  • ROHS Compliance

10 Dec

NJT5762FA 10W C-Band BUC w/150W AC/DC Power Supply

The NJR NJT5762FA is a 10W C-Band BUC with 150W AC/DC Power Supply. RF Output Frequency: 5.85-6.425 GHz. Output Power @P1dB: 10W (+40 dBm). IF Frequency: 950-1525 GHz. Input Connector: Type F Female. Output Interface: CPR137 Waveguide Flange (with groove). DC Power supplied by 150W AC/DC PSU. Power Consumption: 69W typical/75W Max. Weight: 3.2 kg (7.0 lbs)

Features

  • High Efficiency & Low Distortion:
    • P1dB: +40 dBm min. over temperature
    • IM3: -28 dBc @ Pout = +37 dBm
    • Power Consumption: 69 W
  • AC Power Operation
    • DC Power supplied by 150W AC/DC PSU
  • Compact Size & Light Weight
    • Weight: 3.2 kg
  • LED Indicator
  • RoHS Compliance

150W AC/DC PSU

The 150W AC/DC Power Supply Unit (PSU) provides stable +48V DC power to operate 10W C-Band BUCs when the modem power supply is not adequate.
The PSU contains a bias-tee to pass the 10MHz reference and L-Band IF signals from the modem.

06 Dec

O3B Network Ka-Band 10W BUCs NEW! at Satcom Resources

New Japan Radio’s O3B Networks Ka-Band 10W BUC upconverts an L-Band IF signal to Ka-Band (27.652 to 29.071 GHz) and can be used with any network that requires a high quality Ka-Band SSPA with Upconverter.

The NJT5836L transmits 10W Output Power (+40 dBm) over 27.652 to 28.388 GHz, LO frequency: 26.600 GHz, IF Frequency: 1052 to 1788 MHz, Power Requirement: +22 to +56 V DC, N-type female input connector (50 ohm), WR28 Waveguide w/groove output.

The NJT5836H transmits 10W Output Power (+40 dBm) over 28.172 to 29.071 GHz, LO frequency: 27.200 GHz, IF Frequency: 972 to 1871MHz, Power Requirement: +22 to +56 V DC, N-type female input connector (50 ohm), WR28 Waveguide w/groove output.

NJT5836 Features

  • RF Frequency:
    • 27.652 – 28.388 GHz with 26.600 GHz LO
    • 28.172 – 29.071 GHz with 27.200 GHz LO
  • High Efficiency Output Power
    • Saturation Output Power: +40 dBm (10W)
    • ACPR: -25 dBc max. with up to +37 dBm output
    • Power Consumption: 170 W max.
    • Gain Control: 15 dB range, 1 dB step
    • Power Monitor: 12 dB dynamic range
  • Ethernet M&C Function Equipped
  • Reliable All-weather Performance

Subscribe

Search